We manufacture drilling rigs uniquely suited to the conditions in rural areas. Our SIMBA series of drills are very light-weight and mobile but this is not achieved at the expense of power. The SIMBA MK1 and MK2 water well rigs are designed to be very simple to operate and maintain yet incorporate innovative feed and rotation concepts. The drill rigs are customized to the requirements of each customer and we provide on-site training for the users.

DECK ENGINETruck
  • Cummins B-series: B5.9 TA
  • 180 Horsepower
  • TATA 2516 6 x 4
  • Cummins B5.9 TA engine
  • 160 HP @ 2500 rpm
  • 6-speed gearbox
  • 650 Nm @ 1500 rpm
  • Top Head RotationFeed System
  • Compact Design
  • Drill Motor Configuration
  • No additional gears or bearing
  • Performance: 5000 ft lbs
  • Maximum Torquee available at all speed
  • 4" spindle bore
  • Tilt and slide function
  • Floating sub fitted
  • Direct feed cylinder with regeneration circuit
  • No crown loads
  • Single cylinder: 110mm x 80mm x 7200mm
  • No cables, chain,sheaves or pulley
  • Travel:7100mm
  • Pull back: 20000kgs
  • Pull down: 8000 kgs
  • Fast up-feed: 18.9 m/min
  • Slow up-feed: 12.0 m/min
  • down-feed 33m/min
  • MastTooling winch
  • Tubular steel,all welded lattice type
  • Total Length:9 meters
  • Roller bearing guiding for top drive unit
  • Planetary Design
  • Oil disc brake
  • 5 ton S.W.L rating
  • 9.5 m/min (first layer)
  • 35 m capacity of 11 mm wire
  • Make: Ramsey (USA)
  • Foam InjectionHammer Lubricator
  • 45 litres per minutes
  • 800 psi maximum pressure
  • Make: CAT(USA)
  • Positive Displacement Type
  • Constant Oil Supply- unlike Venture type systems
  • 55 litres Oil Capacity
  • Welding UnitLighting Package
  • Hydraulically Operated
  • 200 Amp Rating
  • 240 volts output for accessories.
  • Mast: 3 lights (60 watts)
  • Deck: 1 light (60 watts)
  • Control Panel: 1 light (60 watts)
  • Rig StabiliserHydraulic Systems
  • Real: 125 mm bore x 1000mm stroke
  • Front:125 mm bore x 1000mm stroke
  • Real:Individual Control
  • Front: Single Balancing Individual control
  • All Stabilizer fitted with cylinder lock valve.
  • Open Loop System
  • Suction and Return Filtration
  • (10 microns)
  • 500 liter Oil reservoir
  • Thermostatically Controlled cooling systems.
  • Drill Pipe and Casing HandingAccessories
  • 6 meters maximum drill pipe length.
  • 6 meters maximum drill casing length
  • Sliding Rotary Head
  • Single Breakout Cylinder
  • Side Mounted lockable Toolbox
  • Download our catalogue HERE

    Download our catalogue HERE

    © copyright Drilling Spares and Services Ltd 2015                               Powered By Netswitch Systems