This heavy hoist, range 3 ready drill rig is suited to deep water well, or shallow oil and gas exploration work. The rig is also used for mineral exploration drilling and can be set up for reverse circulation. The rig is equipped with a telescoping mast and is mounted on a heavy carrier, which allows it to be moved easily on commercial roads without traffic disruption. We have equipped the rig with a hands free drill pipe and casing handling system to improve the safety of the crew on the drill site.

DECK ENGINE OUTRIGGERS
  • Detroit Diesel DDC/MTU 12v/2,000TA DDEC.
  • 760bhp (567kw) @ 1,800rpm.
  • 2x110 gallons(416 l)fuel tanks.
  • Air or electric start available
  • Single front 5-inch(127 mm) bore x 41-inch(1.04m)
  • Dual rare 5-inch(127 mm) bore x 41-inch(1.04m)
  • Standard CompressorWinch
  • Variable volume 2-stage, oil flooded rotary screw compressor.
  • Selectable air: 1,150 cfm @500 psi (3602m3/min @24.1 bar)
  • Schramm patented air control
  • Planetary design with spring applied hydraulic release brake.
  • 9,600 lbf (42.7kN) bare drum line pull
  • 150fpm(46m/min) bare drum line speed
  • CoolingHYdraulic System
  • Three core, side by side heat exchanger with variable speed cooling fan.
  • 117F (47C)ambient design temperature.
  • Open loop load sensing system.
  • 200 gallons(760l) system capacity
  • 7 micron filtration.
  • CarrierWater Injection System
  • CCC 8 x 4 carrier.
  • Cummins engine rated 425 hp @ 2,100 rpm.
  • 44,000 lb(19,955 kg) front axle.
  • 21,500 (9,750kg) pusher axle.
  • 52,000lb (23,587kg) full locking rare axle
  • 117,500lb(53,298kg)GVWR
  • 25 gpm (95lpm) water pump
  • electric foam pump
  • 8 ft (2.44m)
  • 56,000 - 72,000 lbs (25,400 -32,650 kg)
  • MASTTOP HEAD DRIVE
  • Telescopic mast design permits long head travel and working heights,yet short overall length in transport position.
  • Free standing mast design.
  • Hydraulically operated adjustable mast feet.
  • 69ft 9inches (21.25m) overall height fully extended.M
  • 42ft 9 inches(13m)overall height retracted for transport.
  • Heavy duty, single reduction gear box with multiple disc valve type hydraulic motors.
  • Infinitely variable rotation speed via HRC control.
  • Maximum Torque:8884 ft-lbs (12045N-m),/li>
  • Rotation Speed: 0 - 143 RPM.
  • Maximum operating pressure: 3000psi (208 bar)
  • FEED SYSTEMDRILL TABLE
  • 50ft (15.24m) head travel
  • 130,000 lbf(578kN) pullback
  • 125fpm(38.1m/min) pullback speed
  • 32000 lbf (142kN)pulldown
  • 270fpm (82.3m/min)pulldown speed.
  • Table opening: 20inches (508mm) or 28 inches.(711mm)with table retracted.
  • Hydraulically retractable slip box
  • TOOL LUBRICATORDRILL PIPE AND CASING
  • Positive Displacement, air operated piston type pump.
  • Oil Flow: 0 - 5.0g/hr(0-13l/hr)
  • Range III Tubular capability.
  • 28 inch (711mm) maximum diameter through the slip box.
  • LIGHTING & ELECTRICAL SYSTEMSRIG WEIGHT & DIMENSION
  • 24 volt DC electrical system.
  • Mast: -(4) 60 watts floodlights.
  • Control panel-(2) 60 watts gauge floodlights.
  • Work-(3) 70 watts halogen.
  • OA length, transport: 42ft 9 inches(13m).
  • Front mast down transport overhang ranges 6 - 8 ft(1.8 - 2.4m)
  • OA width:8ft 6 inches(2.6m).
  • OA height transport: 13 ft 6 inches(41m)
  • Typical GVWR:100,000 - 110,000lbs(45,359 - 49,895kg)
  • OPTIONAL EQUIPMENTSSTANDARD ACCESSORIES
  • Tilting Top Head.
  • High Capacity Top Head.
  • Sliding angle mast with operating angle adjustable to 45 degrees.
  • Casing Rotator.
  • Reverse ciculation package.
  • Loadsafe automated pipe handling system.
  • Single pipe load arm.
  • Auxilliary winch control.
  • Tool Box.
  • Pipe Handling Sling
  • Breakout wrench.
  • 50 hours maintenance kit.
  • The typical application for this drill rig are:
    • 1. Deep water well drilling.
    • 2. Conductor well drilling.
    • 3. Shallow oil and gas drilling.
    • 4. Mineral exploration drilling.

    Download our catalogue HERE

    © copyright Drilling Spares and Services Ltd 2015                               Powered By Netswitch Systems